Skip to main content
Tow CalcFinanceCompare

Can a Mercedes-Benz G-Class tow
an Avan Campers Caravans & Motorhomes Ray Pop Top?

G300 CDI Professional (2010), checked against the manufacturer's published figures.

Yes

The Avan Campers Caravans & Motorhomes Ray Pop Top's published ATM of 1,930kg sits 1,210kg under the Mercedes-Benz G-Class's 3,140kg braked towing rating.

Braked towing ratingThe Mercedes-Benz G-Class, manufacturer published
3,140kg
Towball ratingThe Mercedes-Benz G-Class, manufacturer published
140kg
ATMThe Avan Campers Caravans & Motorhomes Ray Pop Top, maximum loaded weight, manufacturer published
1,930kg
Ball weightThe Avan Campers Caravans & Motorhomes Ray Pop Top, manufacturer published
125kg

Figures are the manufacturer's published ratings.

Yes, this pairing is inside the published ratings

The G-Class has a towing capacity of 3,140kg, which comfortably handles the Ray Pop Top (1,930kg).

This is a guide off published figures, not a compliance check.The legal numbers are the compliance plates on your car and the van. Weigh the loaded rig at a public weighbridge to know for sure, then read the ticket.

A towing rating on its own rarely settles a pairing. What decides it for the Mercedes-Benz G-Class and the Avan Campers Caravans & Motorhomes Ray Pop Top is the published figures taken together: the weight the caravan carries when it is loaded, the weight it puts on the towball, and the combined limit the car holds for both of them at once.

Looking at finance for the Ray Pop Top? Enquire with Jade Finance →

Free quote, no obligation.Takes about 2 minutes.

Jade Finance is our finance partner. If you finance through them, Jade pays us a commission.It's part of what keeps this site free. About us

See all caravans you can tow with a Mercedes-Benz G-Class →

Mercedes-Benz G-Class

G300 CDI Professional (2010)

Specs apply to 2010-2019 models
Tow capacity3,140kg
Ball weight limit140kg
GCM6,700kg

Avan Campers Caravans & Motorhomes Ray Pop Top

Starting from $35,000

Ray Pop Top
ATM (max weight)1,930kg
Ball weight125kg
View caravan details

Always check your compliance plate

Online databases use factory-standard specs. They don't know about your bullbar (adds weight), suspension upgrades (can change GCM), or how much you're carrying.

How to find it

Open your passenger or driver door. Look for a silver or black metal plate riveted to the pillar. This plate overrides everything you read online.

Why the numbers move once you load up

The figure most often left out of the sum is payload, which is everything you add after the vehicles leave the factory.

  • • Bullbar and winch: both add weight to the front of the car, and it comes out of your payload.
  • • Passengers: everyone in the car comes out of its payload, not just the driver.
  • • Tow ball mass: this comes out of your car's payload, not just your towing limit.

Always weigh your rig fully loaded.

Where to get it weighed, and what the ticket tells you.

This pairing works - now get the required safety gear

Since this pairing sits inside the published ratings, ensure you have the required safety gear. Mirrors and a brake controller are mandatory in Australia for this weight.

Towing mirrors

Legally required when the van is wider than your car

See options →

Brake controllers

Mandatory for trailers over 750kg GTM

See options →

Weight distribution hitch

Keeps the rig level and steering weight on the front axle

See options →

Not sure which brake controller suits your car, or whether it already has one built in? Read the brake controller guide

Some links in this section may be affiliate links. If you make a purchase, we may earn a small commission. This helps us keep the site running and continue providing free guides.

Check another combination

Treat this as a guide off published figures, not a compliance check.The legal numbers are the compliance plates on your car and the van, and where we do not hold a published ball weight we estimate it at 10% of ATM.Weigh the loaded rig at a public weighbridge to know for sure, then read the ticket.

Published specifications are the starting point rather than the finish line. The numbers that decide anything are the ones your own loaded rig puts on the scales.