Skip to main content
Tow CalcFinanceCompare

Can a Holden Commodore Wagon tow
an Australian Off Road Odyssey Signature?

VF (Sportwagon V6 / V8) (2013), checked against the manufacturer's published figures.

Close to the limits

The Australian Off Road Odyssey Signature's published ATM of 2,000kg sits 100kg under the Holden Commodore Wagon's 2,100kg braked towing rating.

Braked towing ratingThe Holden Commodore Wagon, manufacturer published
2,100kg
Towball ratingThe Holden Commodore Wagon, manufacturer published
210kg
ATMThe Australian Off Road Odyssey Signature, maximum loaded weight, manufacturer published
2,000kg
Ball weightThe Australian Off Road Odyssey Signature, manufacturer published
105kg

Figures are the manufacturer's published ratings, checked 11 July 2026.

Possible, but close to the limits

Loaded to its published ATM, the Australian Off Road Odyssey Signature uses all but 100kg of what the Holden Commodore Wagon is rated to tow, so there is little room left for what you pack.

This is a guide off published figures, not a compliance check.The legal numbers are the compliance plates on your car and the van. Weigh the loaded rig at a public weighbridge to know for sure, then read the ticket.

Towing weights are enforced against the plates on the vehicles, never against a brochure. What the comparison above gives you is the Australian Off Road Odyssey Signature's published weights next to the Holden Commodore Wagon's published ratings, so you know which numbers to look for on the plates themselves.

Looking at finance for the Odyssey Signature? Enquire with Jade Finance →

Free quote, no obligation.Takes about 2 minutes.

Jade Finance is our finance partner. If you finance through them, Jade pays us a commission.It's part of what keeps this site free. About us

Holden Commodore Wagon

VF (Sportwagon V6 / V8) (2013)

Specs apply to 2013-2017 models
Tow capacity2,100kg
Ball weight limit210kg
GCM4,400kg

Australian Off Road Odyssey Signature

Starting from $99,900

Odyssey Signature
ATM (max weight)2,000kg
Ball weight105kg

Always check your compliance plate

Online databases use factory-standard specs. They don't know about your bullbar (adds weight), suspension upgrades (can change GCM), or how much you're carrying.

How to find it

Open your passenger or driver door. Look for a silver or black metal plate riveted to the pillar. This plate overrides everything you read online.

Why the numbers move once you load up

The figure most often left out of the sum is payload, which is everything you add after the vehicles leave the factory.

  • Bullbar and winch: both add weight to the front of the car, and it comes out of your payload.
  • Passengers: everyone in the car comes out of its payload, not just the driver.
  • Tow ball mass: this comes out of your car's payload, not just your towing limit.

Always weigh your rig fully loaded.

Where to get it weighed, and what the ticket tells you.

This pairing is inside the published ratings, with not much room left.

Improve your stability

The published weights sit close together here. A weight distribution hitch spreads some of the towball load onto the car's front axle, which is what the ball weight takes off it.

Some links in this section may be affiliate links. If you make a purchase, we may earn a small commission. This helps us keep the site running and continue providing free guides.

Check another combination

Treat this as a guide off published figures, not a compliance check.The legal numbers are the compliance plates on your car and the van, and where we do not hold a published ball weight we estimate it at 10% of ATM.Weigh the loaded rig at a public weighbridge to know for sure, then read the ticket.

Published specifications are the starting point rather than the finish line. The numbers that decide anything are the ones your own loaded rig puts on the scales.