Skip to main content
Tow CalcFinanceCompare

Can a Mercedes-Benz X-Class tow
a Jayco Australia Discovery Outback?

X250d (4-Cyl) (2018), checked against the manufacturer's published figures.

Yes

The Jayco Australia Discovery Outback's published ATM of 3,066kg sits 434kg under the Mercedes-Benz X-Class's 3,500kg braked towing rating.

Braked towing ratingThe Mercedes-Benz X-Class, manufacturer published
3,500kg
Towball ratingThe Mercedes-Benz X-Class, manufacturer published
350kg
ATMThe Jayco Australia Discovery Outback, maximum loaded weight, manufacturer published
3,066kg
Ball weightThe Jayco Australia Discovery Outback, manufacturer published
198kg

Figures are the manufacturer's published ratings.

Yes, this pairing is inside the published ratings

The X-Class has a towing capacity of 3,500kg, which comfortably handles the Discovery Outback (3,066kg).

This is a guide off published figures, not a compliance check.The legal numbers are the compliance plates on your car and the van. Weigh the loaded rig at a public weighbridge to know for sure, then read the ticket.

That comparison uses the Mercedes-Benz X-Class's and the Jayco Australia Discovery Outback's own manufacturer figures, with nothing estimated that we could look up instead. Where a figure is an estimate rather than a published number, the page says so beside it.

Looking at finance for the Discovery Outback? Enquire with Jade Finance →

Free quote, no obligation.The form takes about 2 minutes.

Jade Finance is our finance partner. If you finance through them, Jade pays us a commission.It's part of what keeps this site free. About us

Mercedes-Benz X-Class

X250d (4-Cyl) (2018)

Specs apply to 2018-2020 models
Tow capacity3,500kg
Ball weight limit350kg
GCM6,130kg

Jayco Australia Discovery Outback

Starting from $55,990

Discovery Outback
ATM (max weight)3,066kg
Ball weight198kg

Always check your compliance plate

Online databases use factory-standard specs. They don't know about your bullbar (adds weight), suspension upgrades (can change GCM), or how much you're carrying.

How to find it

Open your passenger or driver door. Look for a silver or black metal plate riveted to the pillar. This plate overrides everything you read online.

Why the numbers move once you load up

The figure most often left out of the sum is payload, which is everything you add after the vehicles leave the factory.

  • Bullbar and winch: both add weight to the front of the car, and it comes out of your payload.
  • Passengers: everyone in the car comes out of its payload, not just the driver.
  • Tow ball mass: this comes out of your car's payload, not just your towing limit.

Always weigh your rig fully loaded.

Where to get it weighed, and what the ticket tells you.

This pairing works - now get the required safety gear

Since this pairing sits inside the published ratings, ensure you have the required safety gear. Mirrors and a brake controller are mandatory in Australia for this weight.

Not sure which brake controller suits your car, or whether it already has one built in? Read the brake controller guide

Some links in this section may be affiliate links. If you make a purchase, we may earn a small commission. This helps us keep the site running and continue providing free guides.

Check another combination

Treat this as a guide off published figures, not a compliance check.The legal numbers are the compliance plates on your car and the van, and where we do not hold a published ball weight we estimate it at 10% of ATM.Weigh the loaded rig at a public weighbridge to know for sure, then read the ticket.

Published specifications are the starting point rather than the finish line. The numbers that decide anything are the ones your own loaded rig puts on the scales.